Anyone know the dimensions of the oring in the ADD W1 v3.3 catch can? Mine has expanded and needs replacement and I'm not paying $10 for a single oring from them. I found online that the v1 catch can was 2mm x 60mm but ADD W1 sells a different oring for the v3.3 so I assume it is a different size?
Oring dimensions for ADD w1 v3.3 catch can?
Join the discussion
Recommended Reading
-
[ALL] : Engine Failures - Share Your Experience
Engine and Technical DiscussionUnfortunately, we seem to have a lot of these threads popping up lately, I would like a single thread to discuss engine failures and what people have had to go through to fix it. If you are going through an engine replacement or have in the past, please be sure to post in here with as much...- 498
- 129K
-
Munky · updated
-
Need a good octane boost that actually works.
Engine and Technical DiscussionWhat's a good octane booster. We have 91 octane here and I would like to run map 2 and 3 .- 2
- 78
-
-
Timing Chain Rattle
Engine and Technical DiscussionI had the 2019 kia optima for almost 4 months and the timing chain rattles in cold weather at start up every day, ever since the first day I bought it. It has 4080 miles. It doesn't sound normal even though Kia says it is. A new car shouldn't rattle in the cold at start up. It only last for a...- 0
- 50
-
Transmission not engaged
Engine and Technical DiscussionMy wife's 2012 EX engine starts but transmission is not engaged. The car stays in Park, the transmission stick can be moved freely through all positions. There is no codes with OBD scan. It has 50700 miles now. Few months ago, the transmission is stuck in Park position few times so I did...- 5
- 123
Join now to ask and comment!