Kia Optima Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
so i have had the dreaded check brake warning with the parking brake light coming on always for a while now and i took it to the dealership and they told me i needed new brake disc and brake pads etc and a bunch of whole other issues that COULD have been the main cause so i decided to proceed with the fixes and prayed that it was left at that and but no 3 weeks later and the light was not fixed and now it won't go away usually with the quick resetting of the vehicle (i mean turning it on and off) would do but it's permanently stuck now and my brakes are still constantly grinding i took it back and they told me i need to replace the active hydraulic booster which is another 3500, i have come to notice that my brake fluid level is not depleting its constantly staying with the same ammount of brake fluid idk why or what that means but pls is there anyone who can point me out on what to do here because i have looked everywhere on the internet for something like this and i can't find any type of solution anywhere
 

· Registered
2012 Black SX Prem. & Tech.
Joined
·
2,806 Posts
Could you summarize the existing symptoms and status of any indicator lights or error codes? I know you mentioned several symptoms and lights but it's unclear how many of those symptoms are ongoing still.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Could you summarize the existing symptoms and status of any indicator lights or error codes? I know you mentioned several symptoms and lights but it's unclear how many of those symptoms are ongoing still.
the breaks are grinding when the "warning hybrid system pull over do not drive" and then "check brake" warning light comes on the dash and i loose all brake pressure but my brakes will still work it just sounds like metal on metal and my gas pedal also goes idle when this happens so i cannot accelerate properly
 

· Registered
Joined
·
4 Posts
the breaks are grinding when the "warning hybrid system pull over do not drive" and then "check brake" warning light comes on the dash and i loose all brake pressure but my brakes will still work it just sounds like metal on metal and my gas pedal also goes idle when this happens so i cannot accelerate properly
I have the same problem, did you solve the problem?
 
1 - 6 of 6 Posts
Top