Search Results for ‘downpipe’

Sharing this because you will all find it entertaining. 2 days before Christmas (6 months ago), I went in to have a downpipe installed. I didn't want to deal with it being 30* out and deal with the inevitable bolts breaking and having to drop the turbo to drill them out. So, what always...

Modified stock turbo for sale $650 shipped Cp-e bellmouth downpipe $330 shipped

Hi, I have Kinetic Catback. I just recently lowered my car and I pulled my downpipe... causing to have leak from it. Now the options are open for an upgrade. I don't want to touch the cat-converter or the midpipe due to warranty reasons. I cant find any videos from youtube regarding any...

I have had a CP-E catback exhaust since September. It has been running great since then. Last week I decided to finish the exhaust and get the down and mid pipe. Today I attempted to install them. As seems to be a reoccurring issue, I had a problem with one of the six studs that holds the down...

So first, let me just say that I bought my car in July. First time ever modding a car so obviously, my knowledge is very poor. But so far, I've done a lot of modding to my '12 sx. Something that surprised me (I'm not sure if this is typical) but my exhaust setup currently was a Borla cat, ark...

- We all know that Korean built cars have a 30 degree clocking on the exhaust flange compared to U.S. built cars. - We all know that 2.4 motor Optima's need to enlarge their bolt holes to use an aftermarket exhaust. - But the big question a lot of people have been asking, is can I purchase a...

Hi folks. I was wondering if I need any fabrication work done if I wanted a dp or my on stock exhaust... I want to purchase nameless dp but I'd if it fits perfectly... Thanks! ---------- Post added at 02:33 PM ---------- Previous post was at 01:43 PM ---------- Helppp

Dealer is asking for $325 OEM, I have no need for it was on car for only 3,000 miles and now I have an aftermarket downpipe. Hit me up if interested

Cleaning out the garage, 3" fabworx intake , has a newer aem dry flow filter, this filter is huge. Only problem is mounting bracket broke off never really had an issue with it. I just let the coupler support the intake. Would reccomend new T bolt clamps. $50 plus shipping. Also have a 3"...

So I installed my downpipe yesterday and I noticed a drop in boost but it does pull harder. Also noticed a bad smell after first driving it this morning, could be the WD-40 I used to get the bolts off though. Just wondering if anyone else has experienced this

Looking for a set of coilovers for a 2011 Optima Turbo and a 2.5" downpipe

Does anyone have the CX Racing Downpipe, and if so, what is your opinion of it? I was thinking about buying a used one that has 2k miles on it and was just not sure if I should. Any input is appreciated.

Alright, so I've done some searching around and really tried to dig into it but never got a solid answer. The CX racing downpipe on a 13 optima turbo. I've seen reports that they are short, or dont bolt up correctly. Many different issues that I've seen. So....does anyone have a solid answer is...

If you are how loud is it? I had the 2.5 Megan with borla cat back and it was very loud and lots of drone.

For sale is a barely used Nameless Performance downpipe I had installed on my 2013 Optima. It was only on the car for about a month before I decided to return it completely to stock after an argument with the service advisor about my warranty. This is my daily commuter and cannot afford to...

I am looking at getting a down pipe installed. Are theses illegal in any way? What type of gains should I see? Megan Racing, Nameless, or CX Racing? How hard is it to install myself in my driveway? Thank you to whomever takes the time to read, answer, and help. ---------- Post added at 08:04...

Trying to set up a shopping cart and im curious in everyones opinion on what gives the best preformance from a dp and mp and does the exhaust chosen play a major role on which dp and mp u use? How does it affect if I choose to out a tune in the future

Does anyone have any opinions on this exhaust system? I emailed their support and got this information: "To clarify, the TURBO model exhaust is 70mm (2.75") into dual 2.5".This would be the ideal setup for max air flow in your car. The non-turbo models are 2.25" FYI..." I have the Nameless...

For anyone who was waiting, it was released today and available to order at Sale Price on their website for limited time. :thumbsup:

The wait is almost over!!!! One of the guys text me this week saying the Downpipe would be released soon. The pieces are being cast and as soon as the castings come in, they will be ready to ship out for those who have been waiting........ HERE is the OLD or Original THREAD Was at SFR...