Really need some help over here :/
I have a factory infinity sound system with navi and amp.
I bought a tesla style Android screen that it should be plug n play for my model but unfortunately it wasn't..
1. I got no sound. I only hear a tzzzzz form the uper speaker in the dash no matter volyom, the sound comming directly after i plug in contact
2. Rear camera connector is smaller then my factory Camera connector.
3. Steering wheel controls not working
I did a research and what i found was that the harness i got with the new tesla unit not plugged in the same diagram as mine. I think is plugged ater a standard sound diagram.
The problem is i couldn't find my diagram on the internet
Anyone have one for the infinity sound system ?
I found some diagrams that should be to the navi with amp but when i tryed to follow it with my factory i find that its not same
See picture down below .
This one for amp sounds tell that:
pin 1 is m-can high
Pin 13 in m-can low
But in my connector :
Pin 1 and pin 13 is empty.
Mine start from pin 2 (brown )
I have a factory alpine amp with a 3 connector. 2 white and one gray (speakers wires?)
I will fix the sound by put a new 5 channel amp using the factory speakers wires in the trunk
But i need the diagram for the connector in the head unit so i got my steering wheel controls working and also try to make the rear camera work
Pictures of the head unit and some of the connectors