Kia Optima Forums banner

LED DRLs installed. Eyeline, pics.

2K views 7 replies 4 participants last post by  theblet 
#1 ·
Hello everyone!

Well, after reading other posts about LED strips, i finally picked up a couple from autozone. They are 12" cool white, 5050 strips. I installed them with a 30 amp relay and 16 gauge auto wiring. The are taped to the back lip of the headlight housing under the hood. I just couldnt bring myself to taping them to the front of the headlight. I only have one question. Is there a better place to grab the switched 12V source than just inserting the bare wire under the fuse? Thanks everyone. Here the pics:

Land vehicle Vehicle Car Kia motors Headlamp
Land vehicle Vehicle Car Headlamp Automotive lighting
Headlamp Automotive lighting Light Vehicle Car
Land vehicle Vehicle Car Headlamp Automotive lighting
 
See less See more
5
#2 ·
Get a fuse tap.
 
#4 ·
Its called a low-profile mini fuse
 
#6 ·
#8 · (Edited)
well i made some changes. installed the fuse tap from autozone. its not an lp but seems to be working fine. Also, i have attached the led strips to some weather stripping for better visibility. heres a couple of pics. Thanks for your help guys.



 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top